Basic Plumbing Tools and Their Use

Do-It-Yourselfers will repair simple problems efficiently if they have the right tools. In order to fix a plumbing issue, below are 7 essential tools you will need in your plumbing tool box.

(c) Plumbing Tips –

• Plumber’s Pliers or also referred to as channel-lock pliers certainly are a must-have for all kinds of plumbing job. When compared to the conventional pliers, the serrated jaws of plumber’s pliers open much wider to get around pipes of all sizes. They can tighten up or loosen various types of fittings, and even secure them into the correct positions. They are available in various shapes and forms.

• A basin wrench has a long handle with jaws at the end. They are made to reach the nuts behind the basin where the faucet attaches. It is an essential tool should you be replacing a basin or a faucet or perhaps fixing a leaky faucet.

• A closet auger is the perfect tool for toilet clogs that a plunger are unable to take care of. This is a pretty cheap tool that can reach even deep toilet clogs. With a closet auger, you’ll seldom ought to call a plumber to correct a blocked toilet. Additionally, there are sink augers that happen to be very helpful tool that excels in clearing up blockages through sinks and bathtubs.

• A pipe wrench is a long-handled wrench meant for working on threaded connections. It is popular on thicker pipes requiring wider-opening jaws. When using the pipe wrench, make sure that the rear sides of the wrench’s jaws make contact with the pipe. This can ensure that loosening or tightening of the pipe won’t damage the pipe or alter its shape.

• Adjustable wrenches are offered in 3 sizes (6-, 10- and 12-inch lengths) and have sleek jaws. They can be used on any nut where you wouldn’t like the metal damaged, much like the chrome nuts you see on furnishings.

• Teflon tape is a thin white tape utilized to secure pipe threads where pipes are joined together. The tape doesn’t have adhesive but clings with pressure instead. It is simple to use and take off and can be easily repositioned. You should only wrap a piece of tape around the threaded end of the pipe and then screw on the connector.

• PVC glue is essential when you are fitting PVC pipe jointly. You simply swab a light amount of glue to the fitting and the pipe and then insert the pipe into the fitting, turning slightly in order for the pipe goes entirely to the fitting. Keep it together for a few seconds, and then quickly get rid of off the excess glue with an old rag.

Leave a Reply

Your email address will not be published. Required fields are marked *