“When hardwood flooring get dull and listless, they are able to remove from the value and look of the house that they once added to. In case you are like many people in this troubled economy, you are interested in ways to save money and biting off a huge bill for a floor refinisher is not something you can definitely afford at this time.”
Before you begin to refinish hardwood flooring in your house, first ensure that it’s the right course of action. This is a good way to increase the value of your home, however isn’t always required. For example, if your floor only has light scratches or a lackluster surface, it may simply need a top coat of finish to have it looking new again. Yet another likelihood is your floor might be too far gone for even hardwood floor refinishing to be enough. In these cases whole planks in your floor may need replacing. If the boards seem soft, spongy, sags or are warped, then consider simply having them replaced.
If the problem with your floor is scratches and dings, then hardwood floor refinishing is most likely an appropriate treatment. Nevertheless, understand that a floor may be refinished several times because it takes a fair amount of sanding, each and every time taking off quite a bit of wood. In order to get an excellent idea of how much wood remains in your flooring, check around the edges. Also keep in mind that maple floors are particularly difficult to deal with, so think about hiring a professional in this case.
The first step in the hardwood floor refinishing process is sanding away the old finish and stain. In addition to revealing the bare wood, sanding levels the floor helping expose the grain of the planks. Sanding and buffing can easily get rid of scratches, scuffs, and cracks, and generally boost the appearance of the wood. You or your floor contractor need to sand several times, vacuuming in between each pass and ultizing smaller-grit sandpaper each and every time.
After the sanding is done sweep the floor and finish it up using the shop vacuum. The floors should be free of residue before you stain the floor. Make certain you stir the stain before applying it to the floor to eliminate any bubbles that could cause a molted look. Utilize a brush to apply the stain slowly in the direction of the grain of wood. Soon after it dries you will need to seal the floors using the roller to apply a thin, uniform layer of sealant again in the direction of the grain of the wood.